Thinkware F100 - 5.4 Initializing the System Settings

Settings
32
5.3.8 Setting the safety cameras
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Safety Cameras, select Enabled or Disabled.
3
Click Save.
5.3.9 Setting the mobile zone alert
Follow the instructions to turn on or off the mobile zone alert.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Mobile Zone Alert, select Enabled or Disabled.
3
Click Save.
5.4 Initializing the system settings
This menu allows you to return all the system settings to the factory default settings. Follow the instructions
to initialize the system settings.
1
From the PC Viewer, click Settings
>
Dashcam Setting.
2
Click Initialize.
3
Click Save.