4. Operation
ARV-310 4-19
● Emergency Stop
Press the EMERGENCY button to stop operation in
emergency.
・ The container rotation and the vacuum pump operation
stop. Air pressure in the vacuum chamber is released to
ambient pressure.
・ The buzzer beeps.
・ All lamps and the “ALM” indications on the all indicators
on the control panel start blinking.
This button is locked when pushed in (push-lock type).
● Cancel of Emergency Stop
To restart operation after emergency stop, cancel the
emergency stop status in the following procedure.
1) Turn the EMERGENCY button C.W. to release the lock.
2) Turn OFF (O) the POWER switch and turn it ON (I)
again.
・ The buzzer stops and the blinking lamps and indicators on
the control panel light out.
・ The power is supplied and the lamps and indicators on the
control panel light up as part of usual power-on operation.
To Next Page
Loading...