3. OPERATION
4. Engage the front hydraulic jack
(T90113). Raise the unit enough to
release the pressure from tow vehicle
off of the fifth-wheel plate. Disengage
the fifth-wheel on the tow vehicle.
5. Rotate the dump valve to the lower
position in order to release the air from
the suspension system to lower the rear
of the unit to ground level (T90075 on
page 18).
6. Lower the front hydraulic jack to lower
the machine to the ground. Make sure
bystanders and your feet are clear when
the machine is lowered (T90114).
7. Engage the throttle to full engine speed
or operating position (T90016).
8. Engage the hydraulic shaker control
(T90017a).
19
Make sure your feet and bystanders
are clear when the machine is lowered.
CAUTION
T90016
T90017a
T90114
Front hydraulic jack
T90113
To Next Page
Loading...