1. SAFETY PRECAUTIONS
The following precautions are suggested to help prevent accidents.
A careful operator is the best operator. Most accidents can be avoided by observing
certain precautions. Read and take the following precautions before operating this
machine to help prevent accidents. Equipment should be operated only by those
who are responsible and instructed to do so.
1.1 GENERAL INSTRUCTIONS
1. Read this manual carefully before using the machine. Working with unfamiliar
equipment can lead to accidents.
2. Do not allow anyone to ride on the machine when being towed.
3. Make sure all safety and instruction decals are in place, and legible. (See
section 1.2).
OPERATING THE MACHINE
1. Always tow the machine at speeds compatible with safety, especially when
operating over rough ground, crossing ditches or turning.
2. Use care when operating on steep grades to maintain proper stability.
3. Be careful when towing through door openings or under overhead objects.
Always make sure there is sufficient clearance.
4. When travelling on public roads, know the local rules and regulations and
make sure your machine is equipped with the proper safety equipment.
5. Watch out for overhead and underground high-voltage electrical lines when
operating the machine.
6. Always park the machine on firm level ground. If necessary, prepare a level
area to operate the machine from.
7. Be watchful of bystanders when starting or during operation.
8. Wear protective clothing such as safety eye wear, hearing protection, steel toe
foot wear, gloves and hard hats.
9. Never attempt to load the machine in excess of capacity.
10. Assure all hydraulic controls are functioning properly, as well as safety devices
are installed and functioning at all times.
11. Never run the engine in a closed building without adequate ventilation, as the
fumes can cause death.
12. Never go under the machine while it is operating.
13. If product is lodged in wire cloth, remove the affected screens from the
machine.
2
To Next Page
Loading...