SHAKERHEAD, SHAFT, SUSPENSION & WIRE CLOTH 7.2.1
Item Part No. Qty. Description
1. 966071 1 Shakerhead Bolted Assembly
2. 966094 1 Drive Shaft
3. 966095 2 Bearing Housing Assembly
* 50336 1 Bearing, Housing
* 50330 1 Snap Ring
* 37184 1 Grease Fitting
* 50250 1 Bearing
4. 45497 16 Bolt, Hex 3/4” x 3 1/2”
5. 45460 104 Washer, Flat 3/4”
6. 45451 48 Nut, Lock 3/4”
7. 966035 2 Counter Weight Assembly
8. 50128 2 Snap Ring
9. 50218 2 Key, Square .375” x 1.125”
10. 45562 1 Coupling, Spline
11. 45253 1 Spider, Hytrel
12. 45663 1 Coupling, Straight Shaft
13. 25408 1 Key, Square 3/8” x 1 1/2”
14. 1240 160 Bolt, Hex 1/2” x 2”
15. 30485 408 Washer, Flat 1/2”
16. 50097 220 Nut, Flexlock 1/2”
17. 841 24 ft 1/2” Crown Bar Rubber (Top)
18. 894 30 ft 3/4” Crown Bar Rubber (Bottom)
19. 50006 3 Wire Cloth 1 1/2” x 1 1/2” Square
20. 1150 9 Bolt, Hex 5/8 x 2”
21. 45458 222 Washer, Flat 5/8”
22. 50103 87 Nut, Flexlock 5/8”
23. 50007 3 Wire Cloth 3/4” x 5” Slot
24. 47688 24 Bolt, Hex 1 x 3 1/2”
25. 50051 24 Nut, Square 1”
26. 50395 1 Neoprene
27. 50396P 1 Retainer
28. 1364 14 Bolt, Hex 3/8” x 2”
29. 1643 28 Washer, Flat 3/8”
97
To Next Page
Loading...