15
5 TV installation
5.1 Set your TV
Put your TV on a firm place which can handle the weight of the TV. To avoid danger, please do
not position the TV near water or heat sources (such as light, candle, heater), do not block the
ventilation at the back of the TV.
5.2 Connect antenna and power
1. Connect the antenna cable to the antenna socket on the back of the TV.
2. Plug in the power cord of your TV (AC 100-240 V~ 50/60 Hz). The TV enters standby
mode (red light).
3. Turn on your TV by pressing the power button of the TV or the power button on the
remote control.
*The exact appearance of the TV, including logo placement and frame, differs by TV model. Please
use these illustrations as reference only.
To Next Page
Loading...
