THOMSON MEC 2 - V1.4 - Page 80

MEC 2 MICROPROCESSOR ENGINE/GENERATOR CONTROLLER
PM056 Rev 6 05/10/15 Thomson Technology
75
MAIN PROGRAMMING MENU
BYPASS DELAY
XX SECONDS
0-99 SECONDS
COOLDOWN DELAY
XX SECONDS
0-9999 SECONDS
NOMINAL RPM
XXXX RPM
0-4000RPM
FLYWHEEL TEETH
ENGINE SPEED SENSING VIA MAGNETIC PICK UP
XXX
0-999 TEETH
CRANK DISCONNECT
XX PERCENT
0-100%
OVER SPEED
XX PERCENT
100-150%
OVER SPEED TRANSIENT
X.X SEC
0.0-9.9 SEC
RUN OUTPUT
FAIL SAFE YES/NO
TOGGLE BETWEEN YES/NO
LOSS OF SPEED SIGNAL
SHUTDOWN
ALARM/SHUTDOWN
TOGGLE BETWEEN ALARM/SHUTDOWN
COMMON FAIL FOR
NOT IN AUTO YES/NO
TOGGLE BETWEEN YES/NO
HORN FOR NOT IN AUTO
TOGGLE BETWEEN YES/NO
PROG OUTPUT #1
Common Fail (Factory default, unless otherwise specified)
PROG OUTPUT #2
PROG OUTPUT #3
PROG OUTPUT #4
PROG OUTPUT #5