THOMSON RD1002 - Active Errors

Page 62
THOMSON RD1000 / RD1002
Edition 2 – October 2010
Receiver Descrambler - User Manual (release 7.3.1)
4.9 Active Errors
Description: Whenever an error occurs on any of the four internal status indicators in the unit, the Error
LED will illuminate on the front panel and the details of the error will be listed in the Active Errors. An
extensive listing of errors and their definitions is included in Appendix B.
Active Errors Display
To display the current errors on the unit use the following steps:
1. Press the button.
2. Use the and buttons to move the cursor to “Active
Errors”, then press the button.
3. Use the and buttons to scroll through the list of
errors.
4. Here is the meaning of the error codes:
- 0-0 global (such as fan error)
- 1-1 error in slot 1 (bottom row)
- 1-2 error in slot 2 (bottom row)
- 1-3 error in slot 3 (bottom row)
- 1-4 error in slot 4 (bottom row)
- 2-1 error in slot 1 (top row)
- 2-2 error in slot 2 (top row)
- 2-3 error in slot 3 (top row)
- 2-4 error in slot 4 (top row)
5. The and buttons can be used to scroll left or right if
the error listing text cannot be entirely displayed on the front
panel.
 Active Errors
0-0 Fan Error
1-0 No TS Present Er
1-3 Not Rcving IPPck
 Menu 
►Active Errors
Event Log
Network