Receiver Descrambler - User Manual (release 7.3.1)
Saving a Profile
1. Use the
and
button to move the cursor to “Save
Current Profile” then press the
button.
2. Use the
and
buttons to change the character and
then the
and
buttons to move to the next
character.
3. Press the
button when finished, to save the Profile.
Loading / Deleting a Stored Profile
1. Use the
and
button to move the cursor to the
stored profile (“profile1” in the example) then press the
button.
2. Use the
and
buttons to select “Apply” or “Delete”,
then press the
button.
Hardware
This lists the hardware of the unit and options that are installed along with the option slot. The indicated
numbers follow the same rules as the active errors. See chapter 4.9 Active Errors
1. Use the
and
button to move the cursor to
“Hardware” then press the
button.
2. Use the
and
buttons to select a hardware unit and
press the
button to see details about the selected
hardware.
3. Use the
and
buttons to scroll up and down through
the details. Press the
button to return to the Hardware
list.
0-0
Controller
P/N:
Assembly 3
Hardware
►0-0 Controller
1-0 Backplane
2-0 Backplane
System
Versions
Profiles
►Hardware
Profiles ←→
Save Current Profile
Stored Profiles
Apply Delete
Profiles
Save Current Profile
Stored Profiles
► profile1
Profiles ←→
►Name:
---------------
Stored Profiles
profile1
Profiles
►Save Current Profile
Stored Profiles
profile1
To Next Page
Loading...
