by selecting your language using tu. Once you have selected your language, press
q to move the highlight to the next item and use tu to change.
Language Here you can choose your language.
Region: Select your region where this receiver is used.
Subtitle: Select Normal to display subtitles per default, Select Hard of
Hearing to show HoH subtitles per default. Select Off to hide
subtitles per default.*
Aspect Mode: Use this option to select the aspect ratio of your TV and
the preferred conversion method. The options are: Auto
(automatic detection of aspect ratio), 4:3 Panscan (Displays
16:9 widescreen broadcasts full screen on your 4:3 TV), 4:3
letterbox (black bars on top and under the picture on a 4:3 TV)
and 16:9 (use this setting for 16:9 TV sets).
Scan mode: Select All to store scrambled and free to air channels or
select Free to store only free to air channels. Note: Scrambled
channels cannot be viewed with this receiver.
Connection: Use this option to adjust the established connection to your
TV set. Select HDMI or TV SCART.
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
When all settings have been made, move the highlight to OK and press OK to
continue.
NOTE: Wrong region selection can lead to missing channels or
channels being stored at wrong positions in the channel list.
4.1 DVB-C Installation
Select Installation and press OK to enter the installation menu. Press pq tu to select
Channel Scan or Auto Scan.
4.1.1 Channel Scan
Select Channel Scan and press OK to enter the Channel Scan menu. Press pq tu
to set Scan mode, Channel No., Frequency, Symbol Rate, Scan QAM and Network Search.
Highlight Search and press OK to start the channel scan. Obtain technical data about
your cable operator’s base channel from your operator and start a Network search from
there to find all channels belonging to the network.
4.1.2 Auto Scan
Select Auto Scan
To Next Page
Loading...
