When all settings have been made, move the highlight to Start and press OK to start
the upgrade process.
After a few seconds, the receiver asks: “Are you sure to burn flash?”. Select Yes to finalize
the upgrade or No to quit without upgrading.
NOTE: If, after a software upgrade, the receiver should behave in an
unexpected way, please perform a factory reset as well. See
chapter 7.4.2.
Warning: After an update the receiver restarts automatically. During the
upgrade process NEVER disconnect the receiver from the mains
or switch off the power! Doing so might damage your receiver
and will void warranty!
7.5 Media*
The Media menu consists of the following submenus: Media Player, HDD Information,
DVR Setting and Remove USB device safely.
Use pq to highlight the menu of choice and press OK to enter. Press EXIT to quit.
7.5.1 Media Player
This function allows playback of different kind of files from the connected USB storage
device. In the Media menu, select Media Player and press OK to enter this menu.
When entering the media player, the highlight is on the USB storage device. Press q
and OK to open the directory respectively its folders/subfolders.
First select which files you like to play back. Press 1 to switch between Video/Record/
Music or Image. Press pq to select a file or folder and then press OK to open the
folder/subfolder (if applicable) or start playback of the file. Press the EXIT button to exit.
Use the buttons like described below in order to choose functions during the different
playback modes (like described in the help banner below):
Video:
INFO: Press the INFO button to set repeat mode. The options are
repeat folder folder icon/repeat once 1 or no repetition (no
icon shown).
1: During the playback of a movie with external subtitles, press
1 to enter the subtitle menu. In this menu you can select size
and colours of your preference.
2: Press 2 to open the Sort menu. You can sort by Name/Time or
Size.
To Next Page
Loading...
