P4
INTRODUCTION
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to
protect against electric shocks and moisture. When unpacking it, make sure that all the
parts are included and keep the packaging away from children. When transporting the
receiver from one place to another or if you are returning it under warranty conditions,
make sure to repack the receiver in its original packaging with its accessories. Failing
to comply with such packaging procedures could damage the product and void your
warranty.
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment.
Otherwise, please follow the instructions below:
• Refer to the user manual of your TV.
• Make sure that the HDMI cable is in a good condition.
• If you use TV SCART connection, use then well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The
following symbols will serve as follow.
Warning Indicates warning information.
Tips Indicates any other additional important or helpful
information.
MENU Represents a button on the remote control or the receiver.
(Bold characters)
Move to Represents a menu item within a window. (Italic characters)
1.4 Accessories
• Installation Instructions
• 1 remote control unit
• 2x batteries (AAA type)
WARNING: The batteries should not be recharged, disassembled, electrically
short-circuited, be mixed or used with other types of batteries.
If rechargeable accumulators instead of batteries are going to
be used (e.g. NiMH), we recommend using types with low self-
discharge to ensure long time operation of your remote control.
1.5 Usage of external USB devices*
• It is recommended to use USB 2.0 storage devices or higher. If your device is not
compatible to USB 2.0 specifications, recording, playback and other multimedia
functions of the receiver might not work properly.
To Next Page
Loading...
