P2
TABLE OF CONTENT
1.0 INTRODUCTION 3
1.1 Safety Instructions 3
1.2 Storage 4
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices* 4
2.0 YOUR RECEIVER 5
2.1 DEFAULT PIN: 1234 5
2.2 Front Panel 5
2.3 Rear Panel 5
2.4 Remote Control 6
2.5 Installing the batteries 7
2.6 Using the remote control 7
3.0 CONNECTION 7
3.1 Connecting to cable TV 7
3.2 Connecting to TV with HDMI cable 7
3.3 Connecting to TV with SCART cable 8
3.4 Connecting to a Digital Audio
Amplifier with S/PDIF 8
3.5 Connecting to a Digital Audio
Amplifier and TV using HDMI 8
3.6 Connecting a USB storage device 8
4.0 STARTING UP FOR THE FIRST TIME 8
4.1 DVB-C Installation 9
5.0 QUICK GUIDE TO USING YOUR
RECEIVER 10
6.0 OPERATION 10
6.1 Changing channels 10
6.2 Info Banner 11
6.3 Selection of audio language 11
6.4 Teletext 11
6.5 Subtitles 11
6.6 Timeshift* 12
6.7 EPG (Electronic Programme Guide) 12
6.8 Instant Recording* 12
7.0 MAIN MENU 13
7.1 Edit Channel 13
7.2 Installation 15
7.3 System Setup 16
7.4 Tools 19
7.5 Media* 21
8.0 TROUBLESHOOTING 24
9.0 TECHNICAL SPECIFICATIONS 26
*This user manual describes the full functionality including the recording function and may not be applicable if the
PVR software has not yet been installed.
THOMSON declares that this item complies with the basic requirements and other relevant regulations of
directives 2004/108/EC and 73/23/EC, RoHS 2002/95/EC
Subject to alterations. In consequence of continuous research and development technical specifications, design
and appearance of products may change. HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured
under license from Dolby® Laboratories. Dolby® and the double-D symbol are registered trademarks of Dolby®
Laboratories. All other product names are trademarks or registered trademarks of their respective owners.
© THOMSON 2015. All rights reserved.
To Next Page
Loading...
