P20
MAIN MENU
Press EXIT to leave.
7.4.1 Information
This submenu shows receiver specific information such as hardware version and
software version. It also displays our web address www.thomsonstb.net. Please have
the Information screen on hand when you call our hotline. The person who answers
your call might ask for the information given in this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored
channels.
Warning: By resetting your receiver to factory default, all your settings and
stored channels will be permanently deleted. Please use this
option with care.
Use pq to select Load Factory Settings in the Tools menu and press OK. You are asked
to input your PIN code.
Input the correct PIN code using the 0~9 (DEFAULT PIN: 1234). A confirmation
window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W Upgrade by OTA
This receiver is equipped with an Over The Air software upgrade function. An
Over The Air update might not be available in your region. Please visit our website
www.thomsonstb.net or contact your local service hotline for more information about
this option.
7.4.4 Upgrade by USB
This feature allows you to upgrade receiver software via the USB port. When new
software is available for your receiver, it can be downloaded from our website
www.thomsonstb.net
Place the software file (unzipped) in the root directory of your USB storage device
(HDD, memory stick etc.) and connect the device to the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press OK to proceed.
The upgrade menu will now be displayed.
Use pq to select Upgrade Mode and choose option Allcode.
Use pq to select Upgrade File and choose the file containing the latest and correct
software.
To Next Page
Loading...
