6: Press 6 to add all files of this directory/folder to the play list.
Press 6 again to delete all files from the play list.
7: Press 7 to open the Edit menu. This menu allows access of the
following functions: rename 4, copy 5, delete 6, create folder
7.
2: Press 2 to open the sort window. You can sort by Name/Time/
Size and Favourite.
INFO: Press INFO to access slideshow settings. You can change the
slide time and slideshow repetition.
3: Press 3 to show the files in a preview of 3x3 pictures.
EXIT: One step back or leave the folder and quit the function.
*This user manual describes the full functionality including the recording function and may not be applicable if the
PVR software has not yet been installed.
7.5.2 HDD Information
This option shows relevant information about the connected USB device. In this menu
you can also format your USB storage device and setup the recording type.
Select HDD Information in the Media menu and press OK to enter.
Now you will see all details as Free and the used Recording Sizes and the used file
system.
Press the YELLOW button Format to format the connected USB device.
Please, enter your PIN code to access this menu and press OK to start formatting.
Warning: Formatting will permanently delete ALL data stored on the
connected device. Please make a backup copy of all data you
wish to keep before entering the HDD Format menu. THOMSON
cannot be held responsible for loss of data from USB devices
used with this receiver.
NOTE: It is possible to use USB storage devices already formatted in
NTFS.
Press EXIT to leave this menu.
7.5.3 DVR Setting*
This menu allows you to configure settings for Timeshift, recording and playback.
Select DVR Setting in the Media menu and press OK to enter.
Use pq to move the highlight and tu to change settings.
Timeshift: Select between Auto, Pause or Off. When Timeshift is set to
Auto it will automatically start every time after tuning to a
channel. When Timeshift is set to Pause it will start only after
To Next Page
Loading...
