THORLABS KIM101 - Chapter 4 Standalone Operation; Menu Option - Set Jog Step Size; Menu Option - Joystick Mode

Page 19 ETN040053-D03
K-Cube Inertia Piezo Motor Driver
Overview (Cont)...
Enable each axis individually or a pair of axes - see
Section 4.4.8.
Set the display brightness - see Section 4.4.9.
Set the voltage - see Section 4.4.10.
Select the stage - see Section 4.4.11.
KIM101
Menu options
7 En Axis Mode
KIM101
Menu options
8 Set Brightness
KIM101
Menu options
9 Set Voltage
KIM101
Menu options
10 Select Stage