USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
25. Laser tube cover
There are installed the laser tube, red dot pointer device, beam combiner and the first
reflective mirror mount. This door is installed with the flap protection sensor
26. Exhaust hose
This is for installing the exhaust device.
27. Blow air port
This port is for connecting hoses of the air compressor.
28. Water in and water out
Both ports are for connection with water pump or water chiller.
29. “No-Water protection” signal port
This port is connecting the chiller with the signal cable.
30. Rear door
On Nova24, there are power supplier (both 24v DC and 36vDC)
On Nova35/51/63, there are installed the laser power supply.
Please open this door for checking these parts, but must pay attention to that electric
current.
31. Manufacture’s Label
It’s Show you the laser information like serial number or manufacturing date etc.
To Next Page
Loading...
