Thunder Laser NOVA Series - Page 8

USERS MANUAL NOVA SERIES
www.thunderlaser.com DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
tech@thunderlaser.com Shatian Town, Shatian Dadao, Mintian
Tel :(86)769 826653 Dongguan City, Guangdong Province, China
8
8
Features
Standard:
Open flap protection, “No Water “protection, Fire alarm protection, Dual air-assist control,
Red Dot Pointer, Auto Focus, Smart board, Motorized Table, Honey Comb Table,
Aluminum blade cutting table, Pass-Through Door, 2,0”(50.8mm) Focus Lens, Warning
light, Emergency Stop, LCD Display, Easily Adjustable Home Position, 3D Engraving,
Maintenance mode, Air pump, Water chiller, Exhaust Fan.
Optional:
Rotary Attachment, High Resolution head (up to 1000DPI, while standard laser head Max
is 500DPI), High air compressor set (Includes water filter).
Control System
Laser power Adjustable from 1 - 100% (typically 5-100%)
Interface Hardware USB: connect to PC and U-disk
Ethernet: connect to PC
Interface Software LightBurn - RDWorksV8
Operating Modes Optimized raster, vector, and combined mode
Buffer Memory 128 MB standard
Laser Equipment
Laser Type: Sealed CO2 Glass Laser Tube
Standard Laser Power: 40W, 60W, 80W, 100W, 130W
Wavelength: 10.6µm
Red dot pointer: Laser Power< 1mW
Wavelength: 630nm – 680nm
Cooling System
Machine Cooling System: Air-Cooled
Tube Cooling System: Water Cooled
Electricity, Power, Breaker INCLUDING THE CHILLER
40 WATT
60 WATT
80 WATT
100 WATT
130 WATT
Electricity
Requirement
110 or 220 Volt AC,50 or 60Hz,Single phase
Power
consumption
1600W
1700W
1900W
2000W
2200W
Recommended
circuit breaker
20A,110V
10A,220V
20A,110V
10A,220V
20A,110V
10A,220V
20A,110V
10A,220V
25A,110V
15A,220V
Ambient Conditions
Ambient temperature +15°C to +35°C / 59°F to 95°F
Humidity 40% to max. 70%, not condensing
Laser Safety
Laser class CDRH Laser Safety
Laser Class 2
CE compliant FDA approved