3
RECOMMENDED TOOLS & MATERIALS
Adhesives:
Instant setting Cyanoacrylate adhesive (thin CA)
Slow setting Cyanoacrylate adhesive (thick CA)
10 Minute Epoxy (fast)
20-30 Minute Epoxy (slow)
Tools:
Model knife,T-Pins,1/2”MASK tape
Small screwdrivers,medium screwdrivers
Scissors
Steel straight edge
Long nose pliers and diagonal cutting pliers
Drill and drill bits (1/16",5/64",3.4mm)
M4x0.7 Tap
Sanding block
Fine felt tip pen and soft lead pencil
Straight building board
R/C System:
6 Channel radio with 5 servos plus one retract servo
Two 24" extension wires for Flapron Function
One 6" extension wire for Battery
or
5 Channel radio with 5 servos plus one retract servo
Two 12" extension wires and one "Y" extension wire
for Aileron
One 6" extension wire for Battery
Engine:
2 cycle:.61~.91
4 cycle:.91~1.2
Propeller:
Appropriate for engine type and preferred
performance
Adhesives - You will need two types of adhesives for the
Rare Bear - Epoxy and Instant (cyanoacrylate) adhesives.
We recommend that you purchase both 5-minute and 30-
minute epoxy to cut down on assembly time, but you can
get by with only 30-minute epoxy if time is not important.
You will also need a small bottle of both “Thick” and “Thin”
instant CA adhesive.
Tools - Model assembly can be much easier if the proper
tools are used. Therefore,we have included in our checklist
to the left, a complete listing of all the tools we used to
assemble our prototype models. As you will notice, many
household tools can be utilized during construction.
Engine - The Thunder Tiger
PRO-60, PRO-90 are the ideal
engines for this airplane.These
quiet-running engines are easy
to start, require no special
break-in periods,are very easy
to maintain and will last for
years.
Muffler (P/N TTR9791) -
Most Pitts style mufflers will
fit this Rare Bear. However,
we recommend the use of
Thunder Tiger custom-made
Rare Bear muffler with two
exhaust pipes that divert the
smoke into the two
concavities of the fuselage to obtain a more scale-like
apperance .This muffler fits TT and OS .60~.90 engines.
ITEMS YOU MAY NEED
TTR1115 - Precision Fueler Valve
TTR2174 - Built in Glow Plug Extension Wire
To Next Page
Loading...
Need help?
General
