OPERATING MANUAL 3. TRANSPORTATION
ThyssenKrupp Aufzugswerke GmbH
Dimensions and weight
The weight is indicated on a sticker on the packing.
For dimensions see delivery note.
For rough data see 2.3 Technical data fig. 4 and/or fig. 11/12 (for version
mounted on frame).
Examination by customer on receipt of goods
Examine the delivered parts for completeness, damage or anything strange.
Report and document shipping damage
After receipt of goods make sure that there is no damage caused during
transport.
Information
• Immediately document the damage noticed (drawing, photograph,
description of damage).
• Send the respective documents immediately to THYSSENKRUPP
AUFZUGSWERKE.
Unpacking
Information
• Dispose packing equipment in accordance with the environmental
standards or make it available for further use.
• Special transport aids and transport contrivances shall not be sent
back to THYSSENKRUPP AUFZUGSWERKE but remain at the
customer.
Intermediate storage
• If the component is not mounted directly after delivery carefully store it at
a sheltered place and see to it that it is provided with a humidity-proof
covering.
• Do not store the component in the open air. Parts without surface coating
lack long-time preservation.
Environmental conditions
Information
Surrounding at the final site of the machine (humidity, temperature) shall
comply with the requirements for machine rooms. (Between +5° and
+40° C according to EN 81).
Relative humidity of air shall not exceed 70%.
To Next Page
Loading...
Need help?
General