Need help?Do you have a question about the ThyssenKrupp Drive DAF330 and is the answer not in the manual?
General| Category | Industrial Equipment |
|---|---|
| Power Rating | 330 kW |
| Protection Class | IP20 |
| Input Voltage | 380-480 V AC |
| Output Voltage | 0-Input Voltage |
| Communication Interface | CANopen |
| Relative Humidity | 5-95% non-condensing |
| Cooling Method | Forced air cooling |
Explains the meaning of pictographs and designations used in the manual.
Provides essential safety requirements, duties of owner/employees, and training.
Step-by-step procedure for emergency operation after safety gear engagement.
Identifies and lists the main parts of the DAF 330 machine with a diagram.
Explains the operational principles of the DAF 330 machine and its brake system.
Presents dimensions and key technical specifications of the DAF 330 machine.
Information on lubrication requirements for the DAF 330 machine.
Details about the information presented on the machine's nameplate.
Describes the different THYSSEN motor types available for the DAF 330.
Instructions on how to connect the motor, referring to terminal diagrams.
Technical data and description of the pulse generator used for control.
Provides terminal diagrams for VVVF motors, fan, and other connections.
States that motor data is available on the type plate.
Describes the machine frames provided for installation and mounting bolts.
Steps for aligning the machine frame and ensuring proper rope departure alignment.
Step-by-step guide for replacing the brake shoes.
Procedure for checking and adjusting the brake shoe stroke.
How to adjust the braking deceleration and force.
Instructions for adjusting the brake test switches and checking their function.
Detailed procedure for disassembling and assembling the traction sheave.
Steps for disassembling and assembling the pulse generator.
Procedure for checking and addressing escaping grease or oil leaks.
Details on the additional pulse generator for enhanced control functions.
Explains the function of the SA3 safety contact on the machine frame.
Table of tightening torques for various screw dimensions and strengths.
Lists optional additional parts available for emergency or repair use.
Technical data and wiring diagram for the pulse generator connecting cable.
Lists changes made in different versions of the manual.
Annex containing scope of application, conditions, and remarks for the type-examination.
To Next Page