31
If the rig tends to move straight
towards you; loosen the top
thumbscrew slowly, until the rig
behaves, and then tighten the
bottom thumbscrew.
TIP: remember these settings
(count the threads showing) so
you can attach the arm quickly
every time!
If the rig tends to move straight
away from you; loosen the
bottom thumbscrew and slowly
tighten the top thumbscrew until
the rig is neutral.
Then re-tighten the bottom
thumbscrew.
Repeat the arm adjustments as
needed until the Axis system is
neutral when set slightly to your
operating side, in balance with
your vest.
You’renowreadytoy!
Arm and vest settings
To Next Page
Loading...
