Tiffen Steadicam AXIS - Included Accessories

6
Steadicam Axis dock
Dock locking knob
Stand receiver 5/8”
Aircraft locking pin
Yoke for Axis sled
Arm hanger
Balancing pin 1/2”
Slide release button
Steadicam Axis gimbal cable
Highlyexiblecable
30” length included with Axis
Also included but not shown:
• Your choice of battery mount (Gold mount or V-lock) with required M3 screws
• Monitor power cable; 3pin mini XLR to 5.5mm DC barrel
• Lightweight BNC video cables (2)
• Metric Allen wrenches (2) for sled assembly
• M5 x 20mm screws (4) for monitor mount and battery mount
• Monitor spacer for custom monitor applications pre-installed on monitor lock screw
Balance weights
1/4 Lb (114g)
weights (4)
1/2 Lb (228g)
weights (2)
Locking screws
Included accessories