8
The role of the operator 8--1........................
Maintenance requirements 8--2......................
General maintenance 8--2..........................
Daily 8--2.......................................
Weekly 8--2.....................................
Monthly 8--3....................................
Maintenance of working parts 8--3...................
Transmission box 8--3.............................
Consumable materials 8--4.........................
Oils for transmission box 8--4.......................
Oils for lubrication/coolant liquid 8--4................
Oils for spray mist system ( optional) 8--4..............
Cutting speed and choice of tools 9-- 1................
Cutting speed 9-- 1................................
Basic version 9--1................................
Choice of blade 9--2..............................
Tooth pitch 9--2..................................
Types of swarf: 9--3...............................
Cutting and feeding speed 9-- 3......................
Lubricant/coolant 9--4.............................
Blade structure 9--4...............................
Types of blades 9--5..............................
Tooth shape 9--5.................................
Blade selection table with respect to cutting speed and
downstroke speed 9--8.............................
Classification of steels 9--9.........................
Classification of steels 9--10.........................
Troubleshooting 10--1..............................
Troubleshooting blade and cutting problems 10--1........
Troubleshooting (control console diagnostics) 10--3......
Displaying the diagnostics menu 10--3.................
Diagnostics 10--4..................................
Error messages, alarm and emergency 10--7............
Optional 11--1....................................
Accessories available on request 11--1.................
Chute type bar loader CB 6001 11--1..................
Optional 11--3....................................
Blade 11--3......................................
To Next Page
Loading...
General