The Timan 3330 is a versatile articulated utility machine designed for a wide range of tasks, offering a combination of power, maneuverability, and ease of maintenance. Its articulated chassis allows for a very small turning radius, with the joint located midway between the front and rear wheels, ensuring the rear wheels follow the route of the front wheels. This design contributes to greater stability, especially on uneven surfaces. The machine is controlled by a control cylinder and Orbitrol connected to the hydraulic pump, which facilitates rotation of the steering wheel and machine even in difficult conditions.
Function Description:
The Timan 3330 is a universal tool carrier capable of performing numerous tasks depending on the type of equipment attached. It can be used for cutting grass, sweeping, cutting live fences, removing snow, and working on roads. The machine is designed for professional operators and can be equipped with various tools and carts attached to the front and rear. The machine is road legal and intended for public roads.
Important Technical Specifications:
- Model: Timan 3330
- Motor: Kubota, 3 cylinders, 1662 displacement, 33/24 hp/kW.
- Cooling system: Water cooling (45°C outdoor temperature).
- Gasoline tank: 47 L.
- Transmission: Piston pumps.
- Wheel motors: 4x Orbitrol motors.
- Speed: 25 km/h.
- Work hydraulics: Gear pumps.
- Capacity outlet rear: 48 l/min (nominal) 180 Bar.
- Capacity outlet front: 48 l/min (nominal) 180 Bar.
- Oil outlet in front: 1 double-acting with flowing position 150.
- Oil outlet rear: 1 double-acting 150 Bar.
- Lifting arm: Flow position and parallel lift standing.
- Lifting capacity: 150 kg 80 cm from quick connector, 300 kg close to quick connector.
- Sound level cabin: EU1322/2014 method B, 79 dB.
- Driving noise: EU98/2018 running, 71 dB.
- Driving noise: EU98/2018 standing, 74 dB.
- Source strength LWA: ISO 6395:2008, 105 dB.
- Electrical system: 12 volt.
- Generator: 65 amp.
- Driving work lights front: 2 x 2 pcs.
- Rear working light: 1 pc.
- Rotating beacon: Standard.
- 13 pole trailer connector: Standard.
- Radio with CD, BT and hands-free: Standard.
- Weights and Measures:
- Access height: 500 mm.
- Length: 2700 mm.
- Width: 1190 mm.
- Height: 1990 mm.
- Turning radius (internal): 530 mm.
- Net weight: 1060 kg.
- Max. weight: 1850 kg.
- Permissible load:
- Maximum permissible load on the front axle: 1300 kg.
- Maximum permissible load on the rear axle: 1300 kg.
- Maximum permissible total weight: 1860 kg.
- Maximum permissible load on the front of the machine: Varies with distance from the machine, up to 450 kg at 0 mm.
- Maximum permissible load on the rear end of the machine: Up to 600 kg at 0 mm.
- Maximum permissible side load of the machine: Up to 350 kg at 600 mm.
Usage Features:
The Timan 3330 offers a comfortable and intuitive operator environment. The driver's cab and lifting arms are located in the front, with the gasoline motor in the rear. Driving forward is enabled by a hydrostatic device with a pump and 4 hydraulic wheel motors. The four-wheel drive is always connected to ensure optimal tractive force and pulling force.
- Steering Column, Operator's Grip, Cabinet and Air Switches: The machine features a side panel, display, ignition lock, accelerator, steering column multi-switch, and ceiling controls.
- Main Starter for PTO: Both the front and rear PTOs are 12V switch-controlled.
- Flow Position Light: Lights up when flow position is activated.
- Joystick Control: The joystick controls the lift arms and allows for pushing forward to lower, and pulling back to raise.
- Joystick Maneuver: Used to control the maneuver valve, which can sweep the broom turn when mounted.
- Switch for Front Hydraulic PTO Jack: Activates the 2 large quick-release clutches on the front of the hydraulic panel.
- Switch to Change Direction of Rotation on Front PTO: Changes the engine's rpm.
- Potentiometer: Sets the engine's rpm automatically adjusted as a function of the motor's load.
- Switch for Operating 3-Pole Electrical Connectors: Located on the front panel of the machine.
- Display: Provides information on hydraulic oil level, engine warning, engine oil pressure, differential lock, hydraulic oil temperature, parking brake, rotating beacon, hazard lights, high beam, trailer indicator, fuel level, right indicator, engine water temperature, digital display, driving speed, revolutions per minute, set points for cruise control, timer, drive mode (ROAD or WORK), and potentiometer.
- Foot Pedals: Direction selector for moving forward, potentiometer accelerator, and direction selector for reversing.
- Steering Column Multi-Switch: Controls flash high beam, low beam, high beam, rotary wiper switch (intermittent, low speed, high speed, window washer), horn, and indicators (right/left).
- Ceiling Controls: Speakers, radio, front working light, rear working light, rotating beacon, working light on tools, working light between camera, hazard lights, cabin light, and fuse box.
Maintenance Features:
The Timan 3330 is designed with maintenance in mind, with clear instructions and accessible components.
- Machine Identification Data: Includes manufacturer information (Timan A/S, Fabriksvej 13, 6980 Tim, Denmark) and space for seller details.
- Main Circuit-Breaker: Located in the rear left of the machine, at the bottom of the rear frame. It has a removable key for anti-theft and breaks the connection to the battery.
- Main Fuses and Relays Rear: Located behind the taillight, accessible by dismounting the side screen. Important: Replace fuses with fuses of greater ampere values.
- Fuses in the Cabinet Roof: Located on the right side of the cabinet roof.
- Fuses in the Cabin: Located to the right of the driver's seat.
- Relays Front: A diagram shows the location and function of various relays (Lower cabin, Upper cabin, Rear switch, Start logic, Stop logic, Engine stop, Empty, Taillight/rear camera/rear alarm, Auto start/stop, Flowing position lift, Common start up, Engine cannot start, Air conditioning, Wipers and washer, Indicator).
- Error Codes: Error codes appear on the vehicle's display. If there are multiple errors, the error code changes every two seconds. Critical errors are accompanied by an acoustic alarm.
- QR Code for Use and Maintenance: The features of the machine are described with videos accessible by scanning a QR code with a mobile phone or tablet.
- Hydraulic Oil: Shell Tellus S3 V 46 or ELF Biohydran TMP 46. Top up with oil from the factory.
- Coolant: Mixture of water and antifreeze (50/50 ethylene glycol).
- Lubrication: NLGI-2 type grease.
- Engine Oil: Texaco Delo 400 XLE SAE 10W-30.
- Air Conditioning: R134a, 380 g.
- Wheels: Tire pressure for factory setting: 1.8 bar, tire pressure behind factory setting: 2.0 bar, tire pressure maximum pressure: 2.75 bar. Tightening torque wheel nuts: 100 Nm.
- Regular Checks: Brake maintenance and adjustment, maintain wheels and tires, lubrication, daily checks.
- Additional Maintenance: Changing fuses, relays rear, relays front, cleaning the machine, main circuit-breaker, diagnoses on display.
Need help?
General
To Next Page