CONTENTS
TIMBERWOLF
TW 150VTR
Section Page No.
INTRODUCTION 1
PURPOSE OF MACHINE 2
M
ACHINE DIMENSIONS & SPECIFICATIONS 2
PARTS LOCATION DIAGRAMS 3
SAFE WORKING 5
Operator’s Personal Protective Equipment Required 5
Basic Woodchipping Safety 5
General Safety Matters - Do’s and Don’ts 6
Noise Test 7
OPERATING INSTRUCTIONS 8
Delivery 8
Operator’s Personal Protective Equipment Required 8
Manual Controls 8
Crawler Track Controls 9
Auto Controls 9
Emergency Stopping 9
Daily Checks Before Starting 10
Engine Controls 10
Starting the Engine 10
Controlling the Engine Speed 10
Stopping the Engine 10
Before Using the Chipper 11
Starting to Chip 11
Chipping 11
Blockages 12
Removing the Funnel 12
Chassis Jacking Point 12
Discharge Controls 13
Hydraulic oil level indicator 13
Fuel Level Indicator 13
Blade Wear 13
SERVICE INSTRUCTIONS 14
Service Schedule 15
Safe Maintenance 16
Engine Servicing 16
Spares 16
Safe Lifting & Securing down of the Chipper 16
Battery Removal and Maintenance 16
Copper Ease Safety Information 17
Battery Safety Information 17
Change Hydraulic Oil and Filter 19
Check Fittings 19
Check Hoses 19
Change Blades 20
Tension Belts 21
Grease the Discharge Flange 21
Grease the Roller Spline and Bearing 21
Grease the Roller Box Slides 22
Greasing Rotor Bearings 22
Track Base Maintenance 22
Lubricate Variable Track Base Slides 22
Replace Oil in Track Drive Unit 23
Draining the Oil in the Track Drive Unit 23
Reduction Unit Oil Types 23
Checking the Rubber Tracks 23
Checking Track Tension 24
Track Loosening / Tightening Procedures 24
Removing the Rubber Tracks 25
Installing the Rubber Tracks 25
Checking Sprocket Wear 25
WARRANTY STATEMENT 26
EC DECLARATION OF CONFORMITY CERTIFICATE 27
IDENTIFICATION PLATES 28
DECALS 29
ELECTRICAL DETAILS 31
CIRCUIT DIAGRAM 32
HYDRAULIC LAYOUT 33
PARTS LISTS 34
25th July 2013
To Next Page
Need help?
General
