TIME MARK TMC430 - Config-Ai-Calib; Config-Ao-Calib

Page 25 of 41
Rev: 2024-10-03
Figure 9
a. First option will be “Reset Fact Settings”; select “YES” to reset, “NO” will
allow you to advance to analog input calibration
b. Press “NEXT” to advance to “CONFIG-AI-CALIB”
7.1.2 CONFIG-AI-CALIB
See section 6.5.1 above
7.1.3 CONFIG-AO-CALIB
See section 6.5.2 above