TIME MARK TMC430 - Input Registers; USB Communications Option; Compatible Systems; Application Download

Page 30 of 41
Rev: 2024-10-03
9.4 Input Registers
• Read: 0x04
• Write: NONE; read only registers
• Format: 3xxxx
Address
Description
1
Fluid Level – implied decimal place
2
Raw A/D Counts
3
Run Time Seconds Pump 1 (0 to 3600)
4
Run Time Seconds Pump 2 (0 to 3600)
5
Run Time Seconds Pump 3 (0 to 3600)
(When Run Time Seconds reaches 3600, the Run Time Hours will increment.)
10. USB Communications Option
10.1 Compatible Systems
The latest version of the communication software for the Model TMC430 controller
was designed for the 64-bit version of the Windows™ software and has been
tested on Windows 10 and Windows 11. The 32-bit versions are no longer
supported.
10.2 Application Download
Contact a Time Mark representative for the username and password of the
download site, as well as the latest version download. The Time Mark representative
should also provide an alternative download link via Microsoft™ OneDrive™ or you
can download Version 2.13 here: http://demo.time-
mark.com/TMC_430/program/TMC430Comm_V2-13.zip
(Username & password are required.)