Page 4 of 41
Rev: 2024-10-03
1. Controller Package Contents
1.1 Package Contents
(1) Model TMC430 Pump Controller
(1) 5.08mm, 2-pin Power Supply Connector
(2) 5.08mm, 6-pin Output Contact Connectors
(1) 3.5mm, 2-pin RS-485 Communications Port Connector
(3) 3.5mm, 5-pin Pump Input Switch Connectors
(1) 3.5mm, 3-pin analog input connector
(1) 3.5mm, 2-pin analog output connector
(1) Installation Download Information Page
1.2 Optional Contents
(1) 24VDC output power supply with 2-pin power supply connector (above)
attached
(1) 35mm Din Rail mounting kit
(1) in-door / panel mounting kit
(1) 6ft standard USB-A to USB-B cable
1.3 Missing Or Broken Parts
If any parts are missing or broken, do not hesitate to contact a Time Mark
representative at: 800.862.2875, Monday through Friday 8:00am to 5:00pm central
time. You may also contact a representative at sales@time-mark.com.
1.4 Controller Software Version
This manual corresponds to the controller software, or firmware, released in
September of 2024. Your controller’s software may differ from these instructions.
2. Introduction
2.1 Description
1) An advanced pump management and control system with powerful out of the
box features that make it a snap to setup and customize using the on-screen
menus or USB communication port with a Windows™ based computer.
To Next Page
Loading...