TIME MARK TMC430 - Controller Orientation; Manual Orientation Convention; Model TMC430 Connections

Page 7 of 41
Rev: 2024-10-03
3. Controller Orientation
3.1 Manual Orientation Convention
This diagram shows the orientation of the model TMC430 and how this reference
manual will refer to the views when necessary.
3.2 Model TMC430 Connections
1) All wiring connections to the controller should be made before powering on the
Model TMC430
2) Provide plenty of wire or cable slack between the model TMC430 and their
terminating connections.
3) Keep all wires bundled and secured away from hinges and other moving parts
where wires might be damaged or frayed.
Figure 2