44
When “Periodic” mode is selected, you can enter “Period(ms)” to send CAN frames
message repeatedly (enter “100” to send CAN messages every 100ms).
To send a single CAN frame message, click “Single Shot”. Click “Send All” to send CAN
frames message repeatedly.
To stop sending CAN frame messages, click “Stop All”.
To add a new send CAN frame message, click “Add” to add new send CAN frame
message and click “Copy” to copy a send CAN frame message repeatedly.
To delete a send CAN frame message, click “Delete” to delete send CAN frame
message.
To Next Page
Loading...