6
2 FEATURES
• Adds two CAN bus port on your computer by connecting to USB 1.1, 2.0 or 3.0 host
and hub ports
• Two DB9 male connector
• Includes one USB A/B cable. Cable length: 90cm
• Provides DC +5V 100mA power for external devices
• Powered by USB port, no external power adapter required
• LEDs indicate initialization and CAN bus status
• Installs as standard Windows COM port; COM port number can be changed to any
COM port number
• CAN bus speed up to 1Mbits
• 512 bytes receive FIFO and 512 bytes transmit FIFO buffer for high speed data
throughput
• Supports CAN 2.0A and CAN 2.0B protocols
• Supported CAN modes
o Standard mode: normal operation on CAN bus
o Listen mode: passive receiving of CAN frames
o Echo mode: transmitter also receives sent frames (for testing purposes)
• Easy plug and play installation and CAN bus device connection
• USB CAN adapter can be controlled over serial port using simple ASCII commands
• USB-2CAN-SI-M has a 2500V galvanic isolation on its CAN bus
• Wide ambient temperature operation 0°C to 60°C (32°F to 140°F)
• CE, FCC approval
• Designed by ARM Cortex-M0 32-bit microcontroller and the USB to UART chip
• Drivers provided for Windows and Linux OS
To Next Page
Loading...