Titan Electronics USB-2CAN-M - Technical Specifications

8
4 SPECIFICATIONS
The tables below show the specifications of USB to 2-port CAN bus adapter:
General
USB Bus
USB 2.0 Full Speed, USB 1.1 compliant
CAN Bus
Supports CAN 2.0A and CAN 2.0B
Chipset
ARM Cortex-M0 32-bit microcontroller
Plug & Play
Supported
IRQ &IO Address
Assigned by system
USB-2CAN-M
Number of Ports
Two
Connector
DB9 male connector
5-pin terminal block
CAN Bus Speed
5kbits to 1Mbits for CAN data transmit & receive
Signals
CAN_H, CAN_L, CAN_GND, CAN_V+
CAN Bus Controller
Bosch C_CAN module
LED
CAN bus data activity, CAN bus error
CAN Bus Mode
Standard mode: normal operation on CAN bus
Listen mode: passive receiving of CAN frames
Echo mode: transmitter also receives sent frames (for testing
purposes)
Protection
+/-16 KV ESD protection for CAN signals