EasyManua.ls Logo

Titanium J8 3000 - Safe Winch Operations (Continued); Safe Positioning and Rope Management; Avoiding Overwork and Motor Issues

Titanium J8 3000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
- Do not stand or walk above the rope with load.
- While pulling, never stand behind the car it is not safety place.
- Every not involved person should stand as far as possible from working winch.
- Remember about your safety, keep balance at all times.
4. Use your rope proper.
- Never carry your winch by the cord, in case of pulling it out from the drum always
leave 8 rolls of the rope.
5. When you work with winch please always use the rope damper.
The situation when the rope breaks is very dangerous for you and all persons who are
in the rope and its elements reach. Using the damper minimalize the risk of the
damages caused by broken rope or accessories.
6. Remember to not overwork the winch.
All data in the specification are the maximum
parameters, calculated for perfect conditions
( flat surface without any slops). When you
choose the winch please take into consideration
the final use.
If the motor become very hot stop the work and
let it cool for a few minutes.
If the engine burn out immediately stop the
work.
If the engine immediately stop winching, turn off the winch and check where is the
problem
Don’t exceed maximum rate d line pull.
WARNING! Your position should be most safe for you, please always
remember that you should stand in a place which can’t be reached by a broken
rope, hook or other elements. Recommended distance from the rope is at least
1,5 x the rope length.
Please remember to leave on the winch at least 8 rolls of the rope.
WARNING!
All data in the
specification are the
maximum parameters,
calculated for perfect
conditions

Related product manuals