EasyManua.ls Logo

Titanium J8 3000 - Rope Handling and Warnings; Rope Pulling Procedure; Critical Usage Warning

Titanium J8 3000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Pulling rope without load:
Start pulling as far as possible from the winch and in the center position. Make it
slowly and carefully.
1. Turn on the device and pull the rope on the drum evenly until there will be
one meter left.
2. Turn off the device and the rest of the rope pull in manual. Winch should be
disengaged.
3. If the drum is hidden pull in whole rope with turned on device. Do not make
it with bare hands.
WARNING! Titanium Winch winches are not to be used to transport
people, lift or hold the load. Any such use may cause winch damages, or
serious personal injuries, even death. Such situations shall be considered
to invalidate the warranty and Titanium Winch shall not be responsible
for any claims arising from such use.
Remember, rope should be always pulled from the bottom of
the drum.

Related product manuals