TKH TKID45F2S - Page 33

User Manual - Network Dome - TKID45F2S - TKID85F2S - TKID45M1S - TKID85M1S
EN
33
Parameter Description Setting
IP Address Device IP address that can be set as required. [Setting method]
Enter a value manually.
[Default value]
192.168.0.120
Subnet Mask Subnet mask of the network adapter. [Setting method]
Enter a value manually.
[Default value]
255.255.255.0
Default Gateway This parameter must be set if the client accesses the
device through a gateway.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1
Preferred DNS
Server
IP address of a DNS server. [Setting method]
Enter a value manually.
[Default value]
192.168.0.1
Alternate DNS
Server
IP address of a domain server.
If the preferred DNS server is faulty, the device
uses the alternate DNS server to resolve domain
names.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.2
MTU
Set the maximum value of network transmission
data packets.
[Setting method]
Enter a value manually.
NOTE
The MTU value is range
from 800 to 1500, the default
value is 1500, Please do not
change it arbitrarily.
Step 3 Click Apply.
z
If the message "Apply success!" is displayed, and the system saves the settings.
The message "Set network parameter success, Please login system again" is
displayed. Use the new IP address to login to the web management system.
z
If the message "Invalid IP Address", "Invalid Subnet Mask", "Invalid default
gateway", "Invalid primary DNS", or "Invalid space DNS" is displayed, set the
parameters correctly.