TKS 6150 - The Fi Lm Prestretcher; Height Adjustment of Pre-Stretcher

A
I6150_05
Fig. 28
Tks Operator’s manual
22
Fig. 29
1.7 The fi lm
prestretcher
1.8 Height adjustment
of pre-stretcher
In order to get a smooth fi lm on the bale, adjust
the fi lm-prestretcher to ensure that the fi lm
centre line and the bale centre line are identical
See Fig. 29
This will vary with different bale diameters.
If bale and fi lm have not been properly aligned,
more fi lm than necessary will be used.
Preparation
• Fit the prestretcher holder.
• Fit the fi lm-prestretcher.
I6150_04
In standard version, the pre-stretcher is
equipped with a gear A, wich provides a fi lm
stretch of approx. 60% (55% or 65%).
See Fig. 28
• Check that the prestretcher rollers can be
easily moved by hand.
• Check that the prestretcher rollers are clean.