Tks Operator’s manual
38
7 Error messages
Owerview of error messages
Error message Explanation
Err - 1
Not in use
Err - 2
The time to lift or lower loading arm is exceeded
Err - 3
The max. time between 2 impulses from rotating table is exceeded
Err - 4
The table is not in loading position
Err - 5
The table is not in unloading position
Err - 6
The max. time for tipping the table up or down is exceeded
Err - 7
The table is not in horizontal position yet, or can not fi nd middle position
Err - 8
The loading arm is higher then the middle position
Err - 9
Film break alarm
To Next Page
