TKS 6150 - Page 40

Tks Operator’s manual
40
Press + in 2 second
RSWLRQ
/DPS
5XQ
VWRS
/RDG
WLS
2SW
2SW
2SW
2SW
2SW
/D
W
W
U
U
/
/
VW
VW
VW
W
Loading included in auto wrap cycle.
Automatically start wrapping after loading.
Warning beacon start-up time before auto cycle.
Unloading included in auto wrap cycle.
Automatically start unloading after wrapping.
After unload, automatically table rotate to load position.
Load arm up time
Load arm down time after Load Arm Work position.
Max. time between 2 table sensor pulses, before alarm.
Time on slow speed wrapping before full speed.
On last round, turn table full speed before break cycle.
On last round, slow speed time in break cycle.
On last round, time break (no output) in break cycle
Unload activation time.
Time delay before tip frame is lowered again.
Time on Tip Frame sensor (wrapping position).
Enter
Esc
Enter
Esc
Enter
Esc
Enter
Esc
Enter
Esc
Enter
Esc
FXW
UU
FW
FF
Rounds to release.
Release time.
Time to cutter close after start unload.
Enter
Esc