Compact IP Codec User's Manual
2
Techno Mathematical Co., Ltd.
2140P
Precautions
Use only the method described in this manual to turn power ON or OFF.
(Refer to Power ON/OFF.)
Using another method creates the risk of Product malfunction.
If you do not plan to use the Product for a long period, unplug it from the
power outlet.
Failure to do so creates the risk of electric shock and fire due to insulation
deterioration, electric leakage, etc.
Plug the power plug into an outlet as far as it will go.
Incomplete insertion creates the risk of electric shock and fire.
Do not do anything that can cause damage to the electric cord and plug.
(Do not pull on the cord, place heavy objects on it, locate it near a heating device,
etc.)
Continued use of a damaged power cord and/or plug creates the risk of electric
shock and fire.
Do not locate the Product in areas where there are large amounts of moisture
and/or dust, where it is exposed to oil smoke and/or steam, or near a heater.
Doing so creates the risk of electric shock and fire.
Do not locate the Product where it is exposed to direct sunlight.
Doing so creates the risk of Product deterioration and/or malfunction, and fire.
Do not use the Product in a location subject to sudden temperature changes,
which can cause condensation to form.
Doing so creates the risk of Product malfunction. Should condensation form on
the product, leave power turned off until it dries.
Do not locate the Product in an unstable location where there is the risk of
dropping due to vibration and/or impact.
Doing so creates the risk of personal injury.
Do not locate the Product in a location where strong magnetism is present.
Doing so creates the risk of Product malfunction.
Should you ever notice smoke, abnormal sound, strange odor, or other
abnormality, immediately stop using the Product.
Continued use of a Product exhibiting such abnormalities creates the risk of
electric shock and fire.
For the rear panel input ports, input only signals that conform to the
prescribed standards. (Refer to Product Specifications.)
Doing so creates the risk of Product malfunction.
To Next Page
Loading...