Compact IP Codec User's Manual
46
Techno Mathematical Co., Ltd.
2140P
Rate Control Table Settings
This section explains configuration of settings for the rate migration packet loss rate,
transmission rate, and encode parameters.
Configure the settings below.
Table 6-4 Encoder – Rate Control Table Settings
Setting Description
Audio Channel / Audio Bit Rate
/ Sampling Rate
Number of audio channels, bit rate, sampling
frequency
(This item is in common with rate control table all
records.)
Lower Limit IP Rate Lower limit transmission rate (64 to 3000 kbps)
(When the transmission rate drops below this setting,
operation is performed according to the lower record
setting value.)
Variation of Up IP Rate Increase transmission rate (1 to 999 kbps)
Variation of Down IP Rate Decrease transmission rate (1 to 999 kbps)
Frame Rate Frame rate (5, 10, 15, 30)
Down Loss Rate Rate decrease packet loss rate (0 to 25.5%)
(The transmission rate is dropped when the receive
packet loss exceeds this setting value.)
Up Loss Rate Rate increase packet loss rate (0 to 25.5%)
(The transmission rate is raised when the receive
packet loss rate is less than this setting value.)
Audio Audio output setting (ON/OFF)
To Next Page
Loading...
Need help?
General