Toa VX-2000 Series - Page 6

6
1. RM-200XF AND RM-200X MICROPHONES ................................ 8-2
1.1. DIP Switch Settings ........................................................................................... 8-2
1.1.1. DIP switch functions ................................................................................. 8-2
1.1.2. Unit ID number settings (Switches 1 – 4) ................................................ 8-3
1.1.3. Microphone input sensitivity adjustment using Level
Meter Mode (Switch 5) ............................................................................. 8-4
1.1.4. Compression settings (Switch 6) ............................................................. 8-5
1.1.5. Enable/Disable switching for the Emergency button and Function key 2 8-5
(Switches 7 and 8, and RM-200XF only) ................................................ 8-5
1.2. RM-200XF Wall Mounting ................................................................................. 8-6
1.3. Mounting the Assembly of RM-200XF and Its Extension RM-210 on a Wall .... 8-8
1.4. RM-200X Wall Mounting .................................................................................. 8-10
1.5. Mounting the Assembly of RM-200X and Its Extension RM-210 on a Wall ..... 8 -11
1.6. RM-200X Expansion With the Addition of the RM-210
(Installed on a Flat Surface) .............................................................................. 8-13
1.7. Creating Remote Microphone Name Labels .................................................... 8-14
2. VX-2000, VX-200XR, VX-200XI, AND EV-200 ........................... 8-15
2.1. Removing the VX-2000's Top and Front Panels .............................................. 8-15
2.2. Changing the RS-232C Connector Location ................................................... 8-16
2.3. Insulating the VX-2000 Control I/O .................................................................. 8-17
2.4. Installing the Insulating Transformer in the VX-2000 System Manager .......... 8-18
2.5. Mounting the EV-200 Voice Announcement Board
on the VX-2000 System Manager .................................................................... 8-19
2.6. Setting the VX-200XI Audio Input Module DIP Switch ..................................... 8-21
2.7. Insulating the VX-200XI Control and Audio Inputs ......................................... 8-22
2.8. Mounting the VX-200XR and VX-200XI in the VX-2000 System Manager ..... 8-23
2.9. VX-2000 System Manager's DIP Switch Settings ........................................... 8-23
2.9.1. DIP switch functions .............................................................................. 8-23
2.9.2. Setting the VX-2000's UK standby mode (switch 5) ............................. 8-23
3. VX-2000SF, VX-200SZ , VX-200SP, VX-200SI , VX-200SO,
AND VX-200SE
............................................................................................. 8-24
3.1. VX-2000SF Surveillance Frame's DIP Switch Settings .................................... 8-24
3.1.1. DIP switch functions ............................................................................... 8-24
3.1.2. Setting the unit ID number for the VX-2000SF Surveillance Frame ..... 8-25
3.1.3. Setting the VX-2000SF's terminator (switch 5) ..................................... 8-26
3.2. Installing the Insulating Transformer in the VX-2000SF Surveillance Frame . 8-27
3.3 Changing the VX-200SZ's ATT CTRL Output to Photocoupler Type .............. 8-29
3.4. Installing the VX-200SE in the VX-200SZ and VX-200SP .............................. 8-30
3.5. Changing the VX-200SI's Logic ...................................................................... 8-31
3.6. Insulating the VX-200SI ................................................................................. 8-32
3.7. Installing Modules (VX-200SZ, VX-200SP, VX-200SI, and VX-200SO) ......... 8-33
in the VX-2000SF Frame ................................................................................ 8-33
4. VP-2064, VP-2122, VP-2241 AND VP-2421
POWER AMPLIFIERS
.............................................................................. 8-34
4.1. Removing the VP Power Amplifier's Top Panel ............................................... 8-34
4.2. Changing the Speaker Line Voltage ............................................................... 8-34
Chapter 8: INSTALLATION AND SETTING PROCEDURES (HARDWARE)