21
4. Use the Printer
Before using this product to print the document, please read the Section
One to Section Four carefully and install the driver of the printer.
Taking the Word under Win10 operating system as an example, we will
introduce how to use the printer to print the document.
4.1. Start the Printer
1. Make sure that the power cord of the printer is connected correctly or
the lithium battery is used properly.
2. Start the computer.
3. Start the printer and the indicator lights are lit. Wait for the paper
feeding indicator light goes out, and then the printer is prepared to print.
4. Confirm that the printer driver has been installed correctly and it
works normally.
5. Connect the printer to PC via USB or WIFI.
6. Put the paper into the printer till the printer automatically leads the
paper to the right place.
Note: please make sure to start the computer first, and then start the
printer (if print via WIFI, please connect to the network first), or it may
lead to the computer can’t recognize the printer. If the computer can’t
recognize the printer, please restart the printer or reinsert USB cable or
reconnect to WIFI.
To Next Page
Loading...