1
Safety Guide
1. Please read all the instructions and keep this operation manual in a
handy place for future reference.
2. Before cleaning the printer, please unplug the power adaptor, take
out the battery and cut off the power.
3. Do not use the printer near the water.
4. Do not place the printer in the unstable vehicle, on the unstable
table or desk. Otherwise, the printer may not work normally or even fall,
which will cause serious damage.
5. The optional battery for this printer is the lithium ion polymer
rechargeable battery. Strictly prohibit putting the battery in high
temperature environments, such as heating, near the fire or exposure to
the sun. Putting the battery in the water, acid, alkaline or salty liquid is
strictly prohibited. Also keep away from the rain. The charge time of the
Li-ion battery should be no more than 12 hours. If the printer will not be
used for a long period of time, remove the battery and store it in a cool
place away from the direct sunlight.
6. This printer has been equipped with a three-core plug for power
adapter, which has a grounding pin. This plug is only suitable for
grounding type electrical outlet. This is a safety precaution. If the plug
fails to fit, contact your electrician to change it. Do not remove or alter
the grounding pin in any manner.
7. Do not put anything onto the power cord. Do not place the printer
in an area where people might step on the power cord
8. If you use an extension cord with the printer, make sure that the
To Next Page
Loading...