Toec OEP103 - Page 33

29
off-line
The showing of the
indicator light is
abnormal
- Cut off the power and restart the printer.
- Please contact the serviceman if the problem
still exists.
The paper can’t be
led to the right place
- Reinsert the paper, and insert the paper to the
bottom;
- Check the size or thickness of paper is
suitable or not;
- Please contact the serviceman if the problem
still exists.
The paper can’t
come out
- If the paper jam occurs, please open the flip
cover to pull out the jammed paper;
- Check the size or thickness of paper is
suitable or not;
- Please contact the serviceman if the problem
still exists.
The character on the
printed paper is too
light
- Adjust it through the printing option.