TOHATSU MFS 8A3 Owner's Manual

ENGINE OPERATION 45
7
the boat to be thrown forward due to iner-
tial force.
Tiller handle type
1. Turn the throttle grip to the slow posi-
tion.
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
3. Push the stop switch for a few sec-
onds to stop the engine.
4. Turn the main switch key to the OFF
position or push the stop switch. ( Do
not forget to turn the key off).
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
2. Turn the main switch key to the OFF
position or push the stop switch. ( Do
not forget to turn the key off).
1. Control lever
2. Mine switch key
ENOW00869-0
After stopping the engine:
z Close the air vent screw on the fuel tank
cap.
z Disconnect the fuel connector of the
engine and the fuel tank.
z Disconnect the battery cord, after each
use.
1
ENOF01107-0
1
ENOF00569-A
WARNING
N
R
F
2
1
ENOF00881-0
ON
OFF
START
2
ENOF00882-0
0)6$B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸯㸰᭶㸯㸱᪥ࠉᅵ᭙᪥ࠉ༗ᚋ㸳󰪍㸲㸷ศ

TOHATSU MFS 8A3 Specifications

General

Brand	TOHATSU
Model	MFS 8A3
Category	Outboard Motor
Language	English