30
● Buzzer setting (Default: ON)
Select whether or not to apply buzzer sound for each key operation. The buzzer for tightening
completion cannot be changed.
Use key to select, and MEM key to confirm and proceed to the next.
(Press MD key to proceed without saving. Press C key to return to RUN measuring mode.)
● Auto power off timer setting (Default: 3 min.)
Select from 3MIN, 10MIN, 30MIN, NONE for auto power off timer.
CTA2-G automatically turns off when there is no key operation or loading for the selected time.
If you select NONE, CTA2-G stays on until the battery runs out or power off.
Use key to select and MEM key to confirm and proceed to the next.
(Press MD key to proceed without saving. Press C key to return to RUN measuring mode.)
To Next Page
Loading...
