48
11. External output
(1) Communication specifications
Synchronous method Start-stop synchronization
Baud rate 2400／4800／9600／19200bps (Default: 9600bps)
Data length 7bit／8bit (Default: 8bit）
Stop bit: 1bit
Parity EVEN / ODD / NONE (Default: EVEN)
(2) Output to PC
Connect CTA2-G to PC with the dedicated communication cable (No.584).
Set the PC communication settings (baud rate, data length, parity) to correspond to the
CTA2-G communication settings.
* If you are using the communication cable (No.584), set the data length to 8bit.
Output format
Single-spindle tightening mode
Production tightening mode
・Tightening starting data
・Tightening torque data
・Angle data
・Final torque
To Next Page
Loading...
