33
● Reset to the default setting
You can reset all the setting (except tightening mode and time setting) to the default setting.
Use key to select DFT-Y to reset to the default setting.
If you would not like to reset, select DFT-N and press MEM key.
(Press MD key to proceed without saving. Press C key to return to RUN measuring mode.)
● Time setting (date / time)
Use key to select time (hour/minute/second) or date.
(Press MD key or C key to return to RUN measuring mode).
● Time setting (hour / minute / second)
Use key to select hour and MEM to confirm and proceed to the next.
(Press MD key to proceed without saving. Press C key to return to RUN measuring mode.)
In the same way, select minute and confirm by MEM key.
(Press MD key to proceed without saving. Press C key to return to RUN measuring mode.)
To Next Page
Loading...
