Tohnichi STC2-G - Data Calculation Functions; Computation Starting Counter; Data Volume Display; Maximum Value Display

9
８． Calculation Function
最大値表示
０２００
０２００
60.0
60.0
This function calculates the data volume, maximum value, minimum value and average value
of the measurement values in the specified range.
Use the key to set the counter value to the upper limit of
the data range you want to
calculates . Hold down the key
for 2 seconds or longer to display the computation screen.
Displays the computation starting counter
Press the key to set the starting counter value.
Press the key.
Press the key to cancel.
Displays the data volume.
Press the key.
Press the key to cancel.
Displays the maximum value.
(Minus values are computed as absolute values.)
Press the key.
Press the key to cancel.
Displays the minimum value.
(Minus values are computed as absolute values.)
Press the key.
Displays the average value.
(Minus values are computed as absolute values.)
Press the key.
Press the key to cancel.
Displays the measurement data.
Press the key to cancel.